NSN 5305-01-361-7058
High Torque Screw
Between 1.390 inches and 1.437 inches fastener length, flat countersunk head style, between 0.578 inches and 0.633 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number PBF1475-5-15 for national stock number 5305013617058.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-361-7058.
-
MPN or Model
PBF1475-5-15
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
139820 - Nickel Bolts/nails/nuts/rivets Etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 1.390 inches and 1.437 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.633 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.312 inches -
Grip Length
Between 0.927 inches and 0.947 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Nickel alloy 718 -
Material Specification
Ams5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-477-5966 MPN 3M1170D5-8AClose Toleran Screw
- 5305-01-530-6567 MPN 3M927-3L15Close Tolerance Screw
- 5306-00-466-0740 MPN VAL23611-5D016Close Tolerance Bolt
- 5306-01-045-2875 MPN VAL23608-6D17Shoulder Bolt
- 5306-01-088-8919 MPN VCC0092-1-24Shear Bolt
- 5306-01-202-8972 MPN LD111-0021-0706Shear Bolt
- 5306-01-206-5179 MPN ST3M753-6H17Shear Bolt
- 5306-01-312-8967 MPN 1385M79P01Machine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-361-7058 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1475-5-15 | Sps Technologies, Llc |
GB510FG5-15 | Northrop Grumman Systems Corporation |
GB510FG5-15 | Sps Technologies, Llc |
VCL0009-5-15 | Valley-todeco, Inc. |
124379-5-15 | Sps Technologies, Llc |
PBF1475-5-15 | Sps Technologies, Llc |
124379-5-15 | Sps Technologies, Llc |
GB510FG5-15 | Northrop Grumman Systems Corporation |
VCL0009-5-15 | Valley-todeco, Inc. |