NSN 5305-01-362-2033
High Torque Screw
Between 1.749 inches and 1.796 inches fastener length, flat countersunk head style, between 0.711 inches and 0.759 inches head diameter, grip diameter: between 0.4985 inches and 0.4995 inches .
Manufacturer part number HT184-8-21 for national stock number 5305013622033.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-362-2033.
-
MPN or Model
HT184-8-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.453 inches -
Fastener Length
Between 1.749 inches and 1.796 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.711 inches and 0.759 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.500 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
40.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 or steel comp 6150 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response or mil-s-8503 military specification 4th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-040-9453 MPN ST3M454-5D34Close Tolerance Screw
- 5305-01-045-5609 MPN ST3M505-3-6Shoulder Screw
- 5305-01-172-5571 MPN SC3102-4-3Close Tolerance Screw
- 5305-01-512-8299 MPN TX1027C6-18AClose Tolerance Screw
- 5306-01-252-9166 MPN ST3M731-3-11Close Tolerance Bolt
- 5306-01-476-9157 MPN 122897-6-17Close Tolerance Bolt
- 5320-01-328-7958 MPN HLT505-6-15Pin-rivet
- 5320-01-347-7264 MPN HLT505-10-41Pin-rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-362-2033 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT184-8-21 | Hi-shear Corporation |
HT-184-8-21 | Sps Technologies Inc |
HT184-8-21 | Lisi Aerospace Canada Corp |