NSN 5305-01-365-0397
High Torque Screw
Between 1.235 inches and 1.265 inches fastener length, flat countersunk head style, 0.577 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS2835C13DT for national stock number 5305013650397.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-365-0397.
-
MPN or Model
NAS2835C13DT
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 1.235 inches and 1.265 inches -
Head Style
Flat countersunk -
Head Diameter
0.577 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.068 inches first hole -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response or ams 5731 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc -
Specification Data
80205-nas2835 professional/industrial association standard
More from these suppliers
- 5940-01-384-0650 MPN NAS1063A20-3MLSTerminal Board Marker Strip
- 5940-01-660-0089 MPN NAS1063Terminal Board Marker Strip
- 5305-00-007-0280 MPN NAS1100C06-18PMachine Screw
- 5305-00-007-0290 MPN NAS1635-02-3PMachine Screw
- 5305-00-012-0459 MPN MS27039DD0820Machine Screw
- 5305-00-045-3181 MPN MS24694S100Machine Screw
- 5305-00-059-3659 MPN MS51958-63Machine Screw
- 5305-00-081-1737 MPN NAS514P1032-8PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-365-0397 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2835C13DT | National Aerospace Standards |