NSN 5305-01-365-0399
High Torque Screw
Between 1.548 inches and 1.578 inches fastener length, flat countersunk head style, between 0.577 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS2835C18DT for national stock number 5305013650399.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-365-0399.
-
MPN or Model
NAS2835C18DT
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 1.548 inches and 1.578 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.577 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first shoulder and 0.086 inches first shoulder -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.313 inches first shoulder -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response or ams 5731 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas2835 professional/industrial association standard
More from these suppliers
- 5305-00-005-5974 MPN NAS1102E3-6Machine Screw
- 5305-00-052-6876 MPN MS24627-52Tapping Screw
- 5305-00-052-8886 MPN MS24630-22Tapping Screw
- 5305-00-057-9593 MPN MS35199-25Machine Screw
- 5305-00-060-7858 MPN NAS1081-08A3Setscrew
- 5305-00-068-0519 MPN MS35190-312Machine Screw
- 5305-00-078-8708 MPN MS51045-18Setscrew
- 5305-00-115-9396 MPN NAS1352-06LL8PSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-365-0399 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2835C18DT | National Aerospace Standards |