NSN 5305-01-365-0407
High Torque Screw
Between 1.485 inches and 1.515 inches fastener length, flat countersunk head style, between 0.337 inches and 0.383 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number BACB30LR3-24 for national stock number 5305013650407.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-365-0407.
-
MPN or Model
BACB30LR3-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
Between 1.485 inches and 1.515 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.337 inches and 0.383 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 1.490 inches and 1.510 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-575-2564 MPN 3M943E5-4-4Headle Shoulder Pin
- 5305-00-245-4591 MPN BACB30LU3-6Close Tolerance Screw
- 5305-01-417-2490 MPN 3M1169V-3-14AClose Tolerance Screw
- 5305-01-417-2490 MPN 3M1169V-3-14AClose Tolerance Screw
- 5305-01-455-1394 MPN 3M927-3L10Close Tolerance Screw
- 5305-01-514-3357 MPN ST3M557-4-11Close Tolerance Screw
- 5306-00-345-2022 MPN STSBG004A04U024Shear Bolt
- 5306-01-004-9474 MPN 327B455P23Machine Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-365-0407 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LR3-24 | Valley-todeco, Inc. |
BACB30LR303-24 | Federal Manufacturing Corporation |
BACB30LR3-24 | Sps Technologies, Llc |
BACB30LR3-24 | Arconic Global Fasteners & Rings, |
BACB30LR3-24 | Sps Technologies, Llc |
BACB30LR3-24 | The Boeing Company |
BACB30LR3-24 | Arconic Global Fasteners & Rings, |
BACB30LR-3-24 | Sps Technologies, Llc |
BACB30LR3-24 | Deutsch Co The |
BACB30LR3-24 | Sps Technologies, Llc |
BACB30LR3-24 | Alcoa Global Fasteners, Inc. |
BACB30LR3-24 | Federal Manufacturing Corporation |