NSN 5305-01-365-6587
High Torque Screw
Between 0.385 inches and 0.415 inches fastener length, pan head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.132 inches .
Manufacturer part number NAS1173E1K for national stock number 5305013656587.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-365-6587.
-
MPN or Model
NAS1173E1K
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.363 inches -
Fastener Length
Between 0.385 inches and 0.415 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.132 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
F16 aircraft antenna assembly -
Thread Diameter
0.190 inches -
Grip Length
Between 0.052 inches and 0.072 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Plastic locking featureiron alloy fastener -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-939-9126 MPN NAS25-4LTrunnion Tank Strap
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 4820-01-647-2890 MPN 118050Ball Valve
- 5305-00-007-6179 MPN NAS1100C04-9Machine Screw
- 5305-00-038-2431 MPN NAS514P632-22BMachine Screw
- 5305-00-057-0527 MPN NASM51958Machine Screw
- 5305-00-058-9365 MPN MS51977-22Setscrew
- 5305-00-079-7978 MPN MS24694S196Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-365-6587 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1173E1K | National Aerospace Standards |
Stock Check
- NE: 364
- NS: 2