NSN 5305-01-365-7262
High Torque Screw
Between 0.746 inches and 0.776 inches fastener length, flat countersunk undercut head style, between 0.266 inches and 0.303 inches head diameter, head height: 0.012 inches .
Manufacturer part number NAS8703-7 for national stock number 5305013657262.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-365-7262.
-
MPN or Model
NAS8703-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.746 inches and 0.776 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.266 inches and 0.303 inches -
Head Height
0.012 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Single Shear Strength
95000 pounds per square inch -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard 1st material response or ams 5737 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-003-9326 MPN NAS6002U16Machine Screw
- 5305-00-007-9894 MPN NAS1102C04-10PMachine Screw
- 5305-00-008-5906 MPN NAS1189E02T6LSocket Head Cap Screw
- 5305-00-057-0508 MPN MS51958-11Machine Screw
- 5305-00-057-0535 MPN NASM51958Machine Screw
- 5305-00-058-9379 MPN MS51977-51Setscrew
- 5305-00-066-7322 MPN MS24694C52Machine Screw
- 5305-00-068-0537 MPN NAS609C3H14Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-365-7262 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS8703-7 | National Aerospace Standards |