NSN 5305-01-369-3508
High Torque Screw
Between 1.573 inches and 1.603 inches fastener length, pan head style, between 0.256 inches and 0.270 inches head diameter, head height: between 0.087 inches and 0.097 inches .
Manufacturer part number NAS1131E21 for national stock number 5305013693508.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-369-3508.
-
MPN or Model
NAS1131E21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 1.573 inches and 1.603 inches -
Head Style
Pan -
Head Diameter
Between 0.256 inches and 0.270 inches -
Head Height
Between 0.087 inches and 0.097 inches -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
W/o internal drive -
Thread Diameter
0.1380 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1131 professional/industrial association standard
More from these suppliers
- 5940-01-341-7797 MPN NAS1063B-1-5Terminal Board Marker Strip
- 1680-01-554-6465 MPN C905NWA12H0Aircraft Amber Lamp
- 5935-01-589-4826 MPN NAS6606-50Electrical Receptacle Connector
- 5940-01-384-3878 MPN NAS1063A2TB107TTerminal Board Marker Strip
- 5935-01-646-7803 MPN NASM21250-08022Electrical Receptacle Connector
- 5305-00-007-3025 MPN NAS1102E04-6BMachine Screw
- 5305-00-056-3995 MPN MS21262-90Socket Head Cap Screw
- 5305-00-057-0536 MPN MS51958-52Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-369-3508 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1131E21 | National Aerospace Standards |