NSN 5305-01-369-3841
High Torque Screw
2.666 inches fastener length, flat countersunk head style, between 1.406 inches and 1.531 inches head diameter, grip diameter: between 0.748 inches and 0.749 inches .
Manufacturer part number NAS7512-032 for national stock number 5305013693841.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-369-3841.
-
MPN or Model
NAS7512-032
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Direction
Right-hand -
Thread Length
0.666 inches -
Fastener Length
2.666 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.406 inches and 1.531 inches -
Grip Diameter
Between 0.748 inches and 0.749 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.750 inches -
Grip Length
2.000 inches -
Thready Qty Per Inch (tpi)
16 -
Material
Iron alloy 660 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-428-6495 MPN NAS1063Terminal Board Marker Strip
- 5305-00-007-6198 MPN NAS1631E26PMachine Screw
- 5305-00-007-6200 MPN NAS1102E04-8PMachine Screw
- 5305-00-043-2678 MPN MS24694S92Machine Screw
- 5305-00-052-5917 MPN MS35198-62Machine Screw
- 5305-00-059-2500 MPN MS51976-65Setscrew
- 5305-00-067-3461 MPN NAS1352C4L412Socket Head Cap Screw
- 5305-00-068-5843 MPN MS24677-74Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-369-3841 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7512-032 | National Aerospace Standards |