NSN 5305-01-369-5511
Captive Screw
Between 0.587 inches and 0.607 inches fastener length, flat countersunk head style, 0.317 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number DPYS7900P-6-A-3.5 for national stock number 5305013695511.
Datasheet
-
Product description
Panel Screw Assembly NSN 5305-01-369-5511.
-
MPN or Model
DPYS7900P-6-A-3.5
-
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.203 inches -
Fastener Length
Between 0.587 inches and 0.607 inches -
Head Style
Flat countersunk -
Head Diameter
0.317 inches -
Internal Drive Style
Cross recess type 1 -
Material Accommodated Thickness
Between 0.075 inches and 0.089 inches -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 locking featuresteel comp 304 stand-off -
Material Specification
Ams5737 assn standard single material response locking featuremil-s-23195 military specification single material response stand-off -
Surface Treatment
Passivate locking featurepassivate stand-off -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response locking featureqq-p-35 federal specification single treatment response stand-off -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-043-0253 MPN 947141-1502Nonprecision Nonwire Wound Variable Resistor
- 4920-00-071-3848 MPN 226250Electro-optical System Components Test Stand
- 5935-00-076-5420 MPN 903084-5Electrical Plug Connector
- 5940-00-082-4897 MPN 8161SSO440Feedthru Terminal
- 5905-00-186-2210 MPN 944205-9091Film Fixed Resistor
- 5935-00-259-6981 MPN 900285-11Electrical Receptacle Connector
- 5950-00-346-9360 MPN 134531-4Radio Frequency Coil
- 5905-00-401-9459 MPN 912115-33Noninductive Wire Wound Fixed Resistor
A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. Attached to panel by threaded bushing or by flaring end of stand-off, or bushing. Used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. May be spring loaded.
Pricing and Availability
Get a quote for 5305-01-369-5511 panel screw assemblyManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
DPYS7900P-6-A-3.5 | Huck International, Inc. |
859794-2 | Northrop Grumman Systems Corporation |
859794-2 | Litton Systems Inc |