NSN 5305-01-370-0090
High Torque Screw
Between 0.885 inches and 0.915 inches fastener length, flat countersunk head style, between 0.2083 inches and 0.2612 inches head diameter, grip diameter: between 0.1625 inches and 0.1635 inches .
Manufacturer part number NAS1992-9T for national stock number 5305013700090.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-370-0090.
-
MPN or Model
NAS1992-9T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
Between 0.885 inches and 0.915 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.2083 inches and 0.2612 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
108000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp 8740 or steel comp 4340 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-6049 military specification 2nd material response or mil-s-5000 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1992 professional/industrial association standard
More from these suppliers
- 5940-00-727-3107 MPN NAS704C2Stud Terminal
- 5905-01-008-5287 MPN NAS1379P2NWirewound Fixed Resistor Network
- 5940-01-125-5487 MPN NAS1063A6-2Terminal Board Marker Strip
- 5940-01-425-6521 MPN NAS1063A15-406Terminal Board Marker Strip
- 5940-01-510-2783 MPN NAS1063C3Terminal Board Cover
- 5940-01-429-1231 MPN NAS1063B41-50Terminal Board Marker Strip
- 5305-00-051-4485 MPN MS51973-10Setscrew
- 5305-00-059-7410 MPN MS35202-27Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-370-0090 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1992-9T | National Aerospace Standards |