NSN 5305-01-372-5329
High Torque Screw
Between 0.410 inches and 0.440 inches fastener length, pan head style, between 0.360 inches and 0.374 inches head diameter, head height: between 0.115 inches and 0.125 inches .
Manufacturer part number P34938 for national stock number 5305013725329.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-372-5329.
-
MPN or Model
P34938
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 0.410 inches and 0.440 inches -
Head Style
Pan -
Head Diameter
Between 0.360 inches and 0.374 inches -
Head Height
Between 0.115 inches and 0.125 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.052 inches and 0.072 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Iron alloy 660 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1578 professional/industrial association standard
More from these suppliers
- 5940-01-354-9983 MPN NAS1063A3-1004Terminal Board Marker Strip
- 5940-01-396-9984 MPN NAS1063A10-TB105ATerminal Board Marker Strip
- 5935-01-608-8388 MPN NAS6212-33DElectrical Receptacle Connector
- 5940-01-615-1074 MPN NAS1063C10-210MTerminal Board Marker Strip
- 5940-01-666-5991 MPN NAS1063A2-536KTerminal Board Marker Strip
- 5305-00-081-1737 MPN NAS514P1032-8PMachine Screw
- 5305-00-121-8886 MPN MS27577-4-14Close Tolerance Screw
- 5305-00-159-5555 MPN NAS1102E04-6Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-372-5329 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
P34938 | Martin Baker Aircraft Co Ltd |
NAS1578C3R1 | National Aerospace Standards |
10113777 | Nimikkeistokeskus Ncb Finland |