NSN 5305-01-373-0400
High Torque Screw
Between 0.461 inches and 0.510 inches fastener length, binding head style, between 0.614 inches and 0.639 inches head diameter, head height: between 0.080 inches and 0.085 inches .
Manufacturer part number 1451M12P05 for national stock number 5305013730400.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-373-0400.
-
MPN or Model
1451M12P05
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
139820 - Nickel Bolts/nails/nuts/rivets Etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.387 inches and 0.449 inches -
Fastener Length
Between 0.461 inches and 0.510 inches -
Head Style
Binding -
Head Diameter
Between 0.614 inches and 0.639 inches -
Head Height
Between 0.080 inches and 0.085 inches -
Spline Major Diameter
0.155 inches -
Grip Diameter
Between 0.189 inches and 0.190 inches -
Internal Drive Style
Torx -
Thread Diameter
0.190 inches -
Grip Length
Between 0.027 inches and 0.047 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Nickel alloy 718 -
Material Specification
C50tf13, class b, cage07482 mfr ref single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-185-1505 MPN 21C2525G001Control Calibration Test Dam
- 5935-00-721-0917 MPN 21C1539-203Electrical Connector Cover
- 4920-01-004-5639 MPN 1C3745G3Extension Arm-main Crank Control
- 4920-01-160-5425 MPN 21C10063P01Aircraft Engine Maintenance Machining Fixture
- 5905-01-226-5752 MPN J165P0360AInductive Wire Wound Fixed Resistor
- 5905-01-271-2821 MPN 7137M73G02Resistor Assembly
- 5935-01-339-0132 MPN 104552-001Electrical Plug Connector
- 5935-01-438-6361 MPN 1615M84G01Electrical Connector Bracket
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-373-0400 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1451M12P05 | General Electric Company |