NSN 5305-01-373-1517
High Torque Screw
Between 0.340 inches and 0.360 inches fastener length, binding head style, between 0.614 inches and 0.639 inches head diameter, head height: between 0.080 inches and 0.085 inches .
Manufacturer part number 1451M12P04 for national stock number 5305013731517.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-373-1517.
-
MPN or Model
1451M12P04
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
139820 - Nickel Bolts/nails/nuts/rivets Etc -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.313 inches -
Fastener Length
Between 0.340 inches and 0.360 inches -
Head Style
Binding -
Head Diameter
Between 0.614 inches and 0.639 inches -
Head Height
Between 0.080 inches and 0.085 inches -
Spline Major Diameter
0.155 inches -
Grip Diameter
Between 0.189 inches and 0.190 inches -
Internal Drive Style
Torx -
Thread Diameter
0.190 inches -
Grip Length
Between 0.027 inches and 0.047 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Nickel alloy 718 -
Material Specification
C50tf13, class b, cage07482 mfr ref single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-126-0732 MPN R984P4561AInductive Wire Wound Fixed Resistor
- 4920-00-147-3692 MPN 1C6289G01Aircraft Engine Maintenance Fixture
- 4920-00-237-9018 MPN 21C4132G01Eng Stall Check Kit
- 4920-00-371-1111 MPN 21C4296G01Turbine Wheel An Lifting Adapter
- 4920-00-400-0315 MPN 21C1620P01Riggin Pin Assembly
- 4920-00-467-0664 MPN 1C6459G01Aircraft Maintenance Fixture
- 5905-00-957-8818 MPN R983P1242BFilm Fixed Resistor
- 4920-00-981-7595 MPN 1C2863G7Control Test Set
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-373-1517 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1451M12P04 | General Electric Company |