NSN 5305-01-373-3845
High Torque Screw
Between 0.449 inches and 0.479 inches fastener length, pan head style, between 0.361 inches and 0.385 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number NAS1143-3 for national stock number 5305013733845.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-373-3845.
-
MPN or Model
NAS1143-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.449 inches and 0.479 inches -
Head Style
Pan -
Head Diameter
Between 0.361 inches and 0.385 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.188 inches -
Thready Qty Per Inch (tpi)
32 -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-501-4656 MPN NAS43DD8-62FCAircr Sleeve Spacer
- 5940-01-384-3975 MPN NAS1063B3-3Terminal Board Marker Strip
- 5940-01-384-3987 MPN NAS1063A2TB107ADTerminal Board Marker Strip
- 5305-00-051-4495 MPN MS51973-17Setscrew
- 5305-00-058-1538 MPN NAS662C0LL2Socket Head Cap Screw
- 5305-00-141-4621 MPN NAS334A13-5Close Tolerance Screw
- 5305-00-203-1253 MPN NAS1635-04-18Machine Screw
- 5305-00-269-2796 MPN MS90726-53Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-373-3845 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1143-3 | National Aerospace Standards |