NSN 5305-01-373-3846
High Torque Screw
Between 0.449 inches and 0.479 inches fastener length, pan head style, between 0.361 inches and 0.385 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number NAS1143E3P for national stock number 5305013733846.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-373-3846.
-
MPN or Model
NAS1143E3P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.449 inches and 0.479 inches -
Head Style
Pan -
Head Diameter
Between 0.361 inches and 0.385 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches threads -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-438-7264 MPN NAS709-5Stud Terminal
- 5935-00-111-1892 MPN NAS1665-16Electrical Connector Backshell
- 5305-00-071-2236 MPN MS90725-15Hexagon Head Cap Screw
- 5305-00-080-9238 MPN NAS584-11TMachine Screw
- 5305-00-109-0010 MPN NAS1634-16Machine Screw
- 5305-00-149-9946 MPN NAS334A11Close Tolerance Screw
- 5305-00-184-8298 MPN NAS1189E04P7LKSocket Head Cap Screw
- 5305-00-257-6284 MPN NAS1100-08-11Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-373-3846 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1143E3P | National Aerospace Standards |
NAS1143E3P | 3-v Fastener Co., Inc. |