NSN 5305-01-374-5947
High Torque Screw
Between 1.454 inches and 1.484 inches fastener length, pan head style, between 0.722 inches and 0.740 inches head diameter, head height: between 0.204 inches and 0.220 inches .
Manufacturer part number NAS1578A6T14 for national stock number 5305013745947.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-374-5947.
-
MPN or Model
NAS1578A6T14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
Between 1.454 inches and 1.484 inches -
Head Style
Pan -
Head Diameter
Between 0.722 inches and 0.740 inches -
Head Height
Between 0.204 inches and 0.220 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1578 professional/industrial association standard
More from these suppliers
- 1680-01-479-6301 MPN NAS355-60-1010Aircraft Control Tube Assembly
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 5305-00-052-5695 MPN NAS1352-06H6Socket Head Cap Screw
- 5305-00-061-7588 MPN NAS1102-08-20Machine Screw
- 5305-00-079-8474 MPN NAS1297-06-7Shoulder Screw
- 5305-00-115-3032 MPN MS21090-0411Socket Head Cap Screw
- 5305-00-138-4367 MPN NAS2805-12Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-374-5947 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578A6T14 | National Aerospace Standards |