NSN 5305-01-374-6947
High Torque Screw
2.250 inches fastener length, flat countersunk head style, between 1.000 inches and 1.022 inches head diameter, grip diameter: between 0.4950 inches and 0.4990 inches .
Manufacturer part number NAS517-8-24 for national stock number 5305013746947.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-374-6947.
-
MPN or Model
NAS517-8-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.750 inches -
Fastener Length
2.250 inches -
Head Style
Flat countersunk -
Head Diameter
Between 1.000 inches and 1.022 inches -
Grip Diameter
Between 0.4950 inches and 0.4990 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.500 inches -
Grip Length
Between 1.485 inches and 1.515 inches -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4130 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-6758 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas517 professional/industrial association standard
More from these suppliers
- 5935-01-045-8086 MPN NAS1653R16B26PNElectrical Plug Connector
- 5940-01-425-6511 MPN NAS1063A5-444Terminal Board Marker Strip
- 5940-01-451-4892 MPN NAS1063A20-500AZTerminal Board Marker Strip
- 5305-00-007-6207 MPN NAS1393E00-3Machine Screw
- 5305-00-051-4497 MPN MS51973-19Setscrew
- 5305-00-059-4552 MPN MS35190-237Machine Screw
- 5305-00-082-1995 MPN NAS1352C02-3PSocket Head Cap Screw
- 5305-00-206-3778 MPN NAS336P12Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-374-6947 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS517-8-24 | National Aerospace Standards |