NSN 5305-01-374-7653
High Torque Screw
Between 0.922 inches and 0.952 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3106 inches and 0.3112 inches .
Manufacturer part number MIL-B-87114 for national stock number 5305013747653.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-374-7653.
-
MPN or Model
MIL-B-87114
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
Between 0.922 inches and 0.952 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3106 inches and 0.3112 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.818 inches first hole -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-449-7674 MPN NAS1063A12-N1000Terminal Board Marker Strip
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 1680-01-544-9075 MPN NAS1375A16SA283Mater Aircraft Hose
- 5940-01-361-8073 MPN NAS1746-6Conductor Splice
- 5305-00-025-4098 MPN NAS1153V32Close Tolerance Screw
- 5305-00-052-6916 MPN MS24629-49Tapping Screw
- 5305-00-058-9381 MPN MS51977-53Setscrew
- 5305-00-102-4558 MPN MS21093-0618Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-374-7653 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MIL-B-87114 | Military Specifications |
NAS1155V9D | National Aerospace Standards |