NSN 5305-01-376-1178
Bolt Stove
Between 0.807 inches and 0.844 inches fastener length, hexagon head style, between 0.049 inches and 0.060 inches head height, width between flats: between 0.181 inches and 0.189 inches .
Manufacturer part number NAS1801-04-13 for national stock number 5305013761178.
Datasheet
-
Product description
Machine Screw NSN 5305-01-376-1178.
-
MPN or Model
NAS1801-04-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.757 inches and 0.844 inches -
Fastener Length
Between 0.807 inches and 0.844 inches -
Head Style
Hexagon -
Head Height
Between 0.049 inches and 0.060 inches -
Width Between Flats
Between 0.181 inches and 0.189 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
Between 36.0 rockwell c and 40.0 rockwell c -
Screw Material
Steel comp 4340 or steel comp 8740 -
Screw Material Specification
Mil-s-5000 military specification 1st material response or ams 6322 assn standard 2nd material response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1801 professional/industrial association standard
More from these suppliers
- 5940-01-432-3257 MPN NAS1063A10-105AYTerminal Board Marker Strip
- 5305-00-007-1559 MPN NAS1100E04-16PMachine Screw
- 5305-00-082-1675 MPN NAS603-23PMachine Screw
- 5305-00-186-9234 MPN NAS1352-02LL4PSocket Head Cap Screw
- 5305-00-256-7282 MPN MS16995-19BSocket Head Cap Screw
- 5305-00-340-4709 MPN NAS1102E06-7Machine Screw
- 5305-00-347-8340 MPN NAS1704-34Shoulder Screw
- 5305-00-432-3885 MPN NAS1154-24Close Tolerance Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-376-1178 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1801-04-13 | National Aerospace Standards |