NSN 5305-01-377-1540
High Torque Screw
Between 0.798 inches and 0.828 inches fastener length, flat countersunk head style, between 0.5353 inches and 0.6192 inches head diameter, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number AIC1701-5-5 for national stock number 5305013771540.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-377-1540.
-
MPN or Model
AIC1701-5-5
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.501 inches -
Fastener Length
Between 0.798 inches and 0.828 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.5353 inches and 0.6192 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.312 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 129.0 degrees and 131.0 degrees -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4928 assn standard single material response and ams4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-524-1125 MPN 100-161-6-4Materi Aircraft Pin
- 5305-00-005-5919 MPN 51B222-40HClose Tolerance Screw
- 5305-00-006-8308 MPN A1C617-19Externally Relieved Body Screw
- 5305-00-308-1472 MPN AIC811-02-7Socket Head Cap Screw
- 5305-00-505-2912 MPN LS15264V3-8Machine Screw
- 5305-00-787-9568 MPN 51B333-11Close Tolerance Screw
- 5305-00-935-7513 MPN NAS110-00-3Machine Screw
- 5305-01-185-7162 MPN LD111-0044-2304Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-377-1540 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC1701-5-5 | Sps Technologies, Llc |
SC5053-5-5 | Arconic Global Fasteners & Rings, |
111395-5-5 | Sps Technologies, Llc |
3D0080-5-5 | Boeing Company, The |
1701-5-5 | Sps Technologies, Llc |