NSN 5305-01-377-1627
High Torque Screw
Between 0.575 inches and 0.605 inches fastener length, flat countersunk head style, between 0.4421 inches and 0.5260 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number 3D0080-4-3 for national stock number 5305013771627.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-377-1627.
-
MPN or Model
3D0080-4-3
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 0.575 inches and 0.605 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.4421 inches and 0.5260 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
Between 0.177 inches and 0.197 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 129.0 degrees and 131.0 degrees -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4928 assn standard single material response or ams4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-268-2047 MPN 12S128-7Aircraft Structural Component Support
- 5305-00-146-2687 MPN HIC1023V6-18Close Tolerance Screw
- 5305-00-146-7189 MPN AIC1023V5-8Close Tolerance Screw
- 5305-00-548-5077 MPN 51B581-4-9HClose Tolerance Screw
- 5305-00-767-3456 MPN 69995-6-6CSocket Head Cap Screw
- 5305-01-022-0114 MPN AIC617-24Externally Relieved Body Screw
- 5305-01-254-4355 MPN LE111-0023-2208Machine Screw
- 5305-01-381-1483 MPN 1701-3-15Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-377-1627 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3D0080-4-3 | Boeing Company, The |
1701-4-3 | Sps Technologies, Llc |
SC5053-4-3 | Arconic Global Fasteners & Rings, |
111395-4-3 | Sps Technologies, Llc |