NSN 5305-01-378-3829
High Torque Screw
Between 0.761 inches and 0.791 inches fastener length, flat chamfer head style, between 0.221 inches and 0.226 inches head diameter, head height: 0.072 inches .
Manufacturer part number MIL-S-87114 for national stock number 5305013783829.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-378-3829.
-
MPN or Model
MIL-S-87114
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.761 inches and 0.791 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.221 inches and 0.226 inches -
Head Height
0.072 inches -
Grip Diameter
0.211 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.138 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1121 professional/industrial association standard
More from these suppliers
- 5940-01-425-6526 MPN NAS1063A14-404Terminal Board Marker Strip
- 5940-01-384-3924 MPN NAS1063C5TB177ATerminal Board Marker Strip
- 5935-01-513-0334 MPN 5A088Electrical Receptacle Connector
- 5940-01-437-8564 MPN NAS1063A2-107CYTerminal Board Marker Strip
- 5305-00-042-9477 MPN MS90725-91Hexagon Head Cap Screw
- 5305-00-063-7662 MPN NAS1204-32Close Tolerance Screw
- 5305-00-143-3190 MPN MS21090-466Socket Head Cap Screw
- 5305-00-150-3598 MPN MS27039-6-11Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-378-3829 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MIL-S-87114 | Military Specifications |
NAS1121E8 | National Aerospace Standards |