NSN 5305-01-380-4553
Bolt Stove
0.937 inches fastener length, flat countersunk head style, between 0.340 inches and 0.385 inches head diameter, internal drive style: cross recess type 1.
Manufacturer part number 995-1350-001 for national stock number 5305013804553.
Datasheet
-
Product description
Machine Screw NSN 5305-01-380-4553.
-
MPN or Model
995-1350-001
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.905 inches and 0.937 inches -
Fastener Length
0.937 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.340 inches and 0.385 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316 -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5985-00-001-6769 MPN 781-5065-001Antenna Case
- 5940-00-009-1491 MPN 546-7176-002Terminal Board
- 5950-00-057-0597 MPN 548-2545-003Radio Frequency Coil
- 5950-00-059-3903 MPN 240-1586-000Radio Frequency Coil
- 5905-00-101-1861 MPN 747-2169-850Inductive Wire Wound Fixed Resistor
- 5935-00-115-3653 MPN 769-4743-001Plug Dummy Connector
- 5930-00-132-2630 MPN 259-2471-060Rotary Switch
- 5930-00-173-3500 MPN 259-2840-040Rotary Switch
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-380-4553 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
995-1350-001 | Rockwell Collins, Inc. |