NSN 5305-01-380-9330
High Torque Screw
0.925 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number AIC985-3D-9 for national stock number 5305013809330.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-380-9330.
-
MPN or Model
AIC985-3D-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
0.925 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
End Application
Pacer dawn -
Thread Diameter
0.190 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Criticality Code Justification
Anee and aaur -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.785 inches first hole -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 national specification 1st treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-158-5368 MPN SC2671-06-6Machine Screw
- 5305-01-276-1610 MPN 965812-421CMachine Screw
- 5305-01-435-6611 MPN BACB30LU9-26Close Tolerance Screw
- 5305-01-477-5817 MPN TX1027V5-5AClose Tolerance Screw
- 5305-01-512-3507 MPN 120-259E3-4Close Tolerance Screw
- 5305-01-530-2400 MPN NAS5314E3-6Close Tolerance Screw
- 5305-01-600-3666 MPN TX1026E4D14AMachine Screw
- 5305-01-627-6605 MPN JSFB38-4-10Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-380-9330 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC985-3D-9 | Sps Technologies, Llc |
VT1694F3-9D | Arconic Global Fasteners & Rings, |
PBF1166-3D9 | Sps Technologies, Llc |
VT1694F3-9D | Alcoa Global Fasteners, Inc. |
121558-3-9P | Sps Technologies, Llc |
5306-005-3D9 | Aidc/aerospace Industrialdevelopment |
H185-3D9 | Huck International, Inc. |
H185-3D9 | Huck Intl Inc |