NSN 5305-01-381-2032
Panel Screw
Between 0.219 inches and 0.250 inches fastener length, pan head style, between 0.155 inches and 0.167 inches head diameter, head height: between 0.053 inches and 0.062 inches .
Manufacturer part number 229-048310 for national stock number 5305013812032.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-381-2032.
-
MPN or Model
229-048310
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.110 inches and 0.130 inches -
Fastener Length
Between 0.219 inches and 0.250 inches -
Head Style
Pan -
Head Diameter
Between 0.155 inches and 0.167 inches -
Head Height
Between 0.053 inches and 0.062 inches -
First Diameter From Head
Between 0.060 inches and 0.065 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.120 inches and 0.140 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.086 inches -
Thready Qty Per Inch (tpi)
56 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 301 or steel comp 302 or steel comp 302b or steel comp 303 or steel comp 303se or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 308 or steel comp 309 or steel comp 309s or steel comp 310 or steel comp 310s or steel comp 314 or steel comp 316 or steel comp 316l or steel comp 317 or steel comp 321 or steel comp 347 or steel comp 348 or steel comp 384 or steel comp 385 -
Surface Treatment
Oxide -
Surface Treatment Specification
Mil-c-13924, cl 4 military specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5905-00-453-2390 MPN 7802-02260-4Inductive Wire Wound Fixed Resistor
- 5940-01-132-6513 MPN 3820-1106-006Stud Terminal
- 5935-00-233-7039 MPN 7049-00252Electrical Plug Connector
- 5905-00-466-3599 MPN 7802-02270-9Inductive Wire Wound Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-381-2032 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
229-048310 | Bae Systems Integrated Defense |
229-048310 | Bae Systems (operations) Limited |
229-048310 | Bae Systems (operations) Limited |
229-048310 | Bae Systems Integrated Defense |
229-048310 | Bae Systems (operations) Limited |
229-048310 | Bae Systems Integrated Defense |
229-048310 | Bae Systems (operations) Limited |
229-048310 | Bae Systems Integrated Defense |
229-048310 | Bae Systems (operations) Limited |
229-048310 | Bae Systems Integrated Defense |
229-048310 | Bae Systems (operations) Limited |