NSN 5305-01-381-2281
High Torque Screw
Between 1.200 inches and 1.230 inches fastener length, flat countersunk head style, 0.4421 inches head diameter, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number AIC1701-4-13 for national stock number 5305013812281.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-381-2281.
-
MPN or Model
AIC1701-4-13
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 1.200 inches and 1.230 inches -
Head Style
Flat countersunk -
Head Diameter
0.4421 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 129.0 degrees and 131.0 degrees -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response and ams 4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-046-6987 MPN NAS1101E06-12BMachine Screw
- 5305-00-503-5684 MPN LS15267V3-40Machine Screw
- 5305-00-505-3039 MPN LS15265V3-19Close Tolerance Screw
- 5305-00-840-5962 MPN A1C617-1Externally Relieved Body Screw
- 5305-00-889-2990 MPN NAS1101C3H8Machine Screw
- 5305-01-047-0971 MPN AIC147-17Machine Screw
- 5305-01-076-4889 MPN NAS1101-08-26Machine Screw
- 5305-01-141-7905 MPN HT4020-6-20AXShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-381-2281 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC1701-4-13 | Sps Technologies, Llc |
111395-4-13 | Sps Technologies, Llc |
3D0080-4-13 | Boeing Company, The |
1701-4-13 | Sps Technologies, Llc |
1701-4-13 | Sps Technologies, Llc |
1701-4-13 | Sps Technologies, Llc |
AIC1701-4-13 | Sps Technologies, Llc |
111395-4-13 | Sps Technologies, Llc |
3D0080-4-13 | Boeing Company, The |
1701-4-13 | Sps Technologies, Llc |
AIC1701-4-13 | Sps Technologies, Llc |
111395-4-13 | Sps Technologies, Llc |
3D0080-4-13 | Boeing Company, The |
1701-4-13 | Sps Technologies, Llc |
AIC1701-4-13 | Sps Technologies, Llc |
111395-4-13 | Sps Technologies, Llc |
3D0080-4-13 | Boeing Company, The |
1701-4-13 | Sps Technologies, Llc |
AIC1701-4-13 | Sps Technologies, Llc |
111395-4-13 | Sps Technologies, Llc |
3D0080-4-13 | Boeing Company, The |
1701-4-13 | Sps Technologies, Llc |
AIC1701-4-13 | Sps Technologies, Llc |
111395-4-13 | Sps Technologies, Llc |
3D0080-4-13 | Boeing Company, The |
1701-4-13 | Sps Technologies, Llc |
AIC1701-4-13 | Sps Technologies, Llc |
111395-4-13 | Sps Technologies, Llc |
3D0080-4-13 | Boeing Company, The |
1701-4-13 | Sps Technologies, Llc |