NSN 5305-01-381-4267
Bolt Stove
Between 0.615 inches and 0.620 inches fastener length, hexagon head style, between 0.170 inches and 0.190 inches head height, width between flats: between 0.367 inches and 0.375 inches .
Manufacturer part number MS51849-95C for national stock number 5305013814267.
Datasheet
-
Product description
Machine Screw NSN 5305-01-381-4267.
-
MPN or Model
MS51849-95C
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.515 inches and 0.620 inches -
Fastener Length
Between 0.615 inches and 0.620 inches -
Head Style
Hexagon -
Head Height
Between 0.170 inches and 0.190 inches -
Width Between Flats
Between 0.367 inches and 0.375 inches -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Screw Material
Steel comp 303se or steel comp 303 or steel comp 303ma or steel comp 303pb or steel comp 303 plus x -
Screw Surface Treatment
Passivate -
Screw Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-007-9202 MPN MS3493-1Tip Plug
- 5935-00-013-9324 MPN MS18157-1NElectrical Receptacle Connector
- 5935-00-018-0929 MPN MS3121E24-61PElectrical Plug Connector
- 5935-00-021-9512 MPN MS3112E14-12SElectrical Receptacle Connector
- 5935-00-052-8382 MPN MS3116F14-5SWElectrical Plug Connector
- 5905-00-141-0723 MPN RCR20G621JPComposition Fixed Resistor
- 5935-00-189-1069 MPN MS3106F24-6SElectrical Plug Connector
- 5940-00-193-5294 MPN MS18029-2S-16Terminal Board Cover
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-381-4267 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS51849-95C | Military Standards |
Stock Check
- NE: 463