NSN 5305-01-381-9892
Tap Bolt
Between 1.688 inches and 1.750 inches fastener length, hexagon head style, between 0.150 inches and 0.163 inches head height, width between flats: between 0.428 inches and 0.438 inches .
Manufacturer part number MS51100-11 for national stock number 5305013819892.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-01-381-9892.
-
MPN or Model
MS51100-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.750 inches and 0.938 inches -
Fastener Length
Between 1.688 inches and 1.750 inches -
Head Style
Hexagon -
Head Height
Between 0.150 inches and 0.163 inches -
Width Between Flats
Between 0.428 inches and 0.438 inches -
Hole Diameter
0.062 inches -
Thread Diameter
0.250 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Hole Configuration Style
Hexagon flats -
Material
Steel comp 410 or steel comp 416 or steel comp 430 -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5905-00-114-5425 MPN RCR20G362JRComposition Fixed Resistor
- 5935-00-148-9378 MPN MS3106A14S-7SCElectrical Plug Connector
- 5935-00-163-3640 MPN MS27473T18A11SElectrical Plug Connector
- 5935-00-172-1157 MPN MS17344R20C27PXElectrical Plug Connector
- 5905-00-185-8518 MPN MS35043-19Composition Fixed Resistor
- 5935-00-199-2622 MPN MS3106A18-10PElectrical Plug Connector
- 5935-00-248-5742 MPN MS3100F16S1PElectrical Receptacle Connector
- 5935-00-280-2822 MPN MS3106A18-8PElectrical Plug Connector
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-01-381-9892 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS51100-11 | Military Standards |
Stock Check
- NS: 3
- NE: 418