NSN 5305-01-383-1625
High Torque Screw
Safety critical item. Apply one coat of mil-p-23377, ty 1, cl 1 or 3 and two top coats of mil-c-46168, color code 33538 per fed-std-595 to top of head.
Manufacturer part number 02329-6 for national stock number 5305013831625.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-383-1625.
-
MPN or Model
02329-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.420 inches -
Fastener Length
Between 2.083 inches and 2.103 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.251 inches and 0.266 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.4986 inches and 0.4991 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Internal Drive Style
Slot -
Thread Diameter
0.500 inches -
Grip Length
Between 1.438 inches and 1.454 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
62500 pounds per square inch -
Hardness Rating
50.0 rockwell c locking feature and 62.0 rockwell c locking feature -
Criticality Code Justification
Feat -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.951 inches first hole and 1.971 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 631 spring or steel comp 302 spring -
Material Specification
Qq-s-763 federal specification all material responses locking feature -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-273-7255 MPN 5305-12Machine Screw
- 5305-00-630-2424 MPN NAS1352-4-28PSocket Head Cap Screw
- 5320-01-408-7202 MPN 02912-5Rivet Assortment
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-383-1625 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
02329-6 | Defense Logistics Agency |