NSN 5305-01-383-5993
High Torque Screw
Between 0.555 inches and 0.565 inches fastener length, flat countersunk head style, between 0.2516 inches and 0.3047 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number PNAS1993002-01 for national stock number 5305013835993.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-383-5993.
-
MPN or Model
PNAS1993002-01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096630 - Screws NOI Brass/bronze/copper -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
Between 0.555 inches and 0.565 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.2516 inches and 0.3047 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-136-8980 MPN 13087499-009Plug Dummy Connector
- 5935-01-137-6297 MPN 13155642-009Plug Dummy Connector
- 1560-01-325-0650 MPN 717531380-002Aircraft Stiffener
- 4920-01-371-5479 MPN 717751204-001Electro Optiical A Heated Target
- 4920-01-539-1202 MPN 77421000-029Interface Device Adapter Assembly
- 4920-01-288-0627 MPN 717701500-039Test Program Set
- 5935-01-222-1136 MPN 13083963-249Self-test Connector
- 5935-01-222-1096 MPN 13082707-79Self-test Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-383-5993 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PNAS1993002-01 | Lockheed Martin Corporation |
PNAS1993002-01 | U S Army Aviation And Missile |
PNAS1993002-01 | U S Army Aviation And Missile |
PNAS1993002-01 | Lockheed Martin Corporation |
PNAS1993002-01 | U S Army Aviation And Missile |
PNAS1993002-01 | Lockheed Martin Corporation |