NSN 5305-01-383-6025
Bolt Stove
Protective finish 1.9.2.3 of mil-std-171, except .0003 thick..
Manufacturer part number 12387332-288 for national stock number 5305013836025.
Datasheet
-
Product description
Machine Screw NSN 5305-01-383-6025.
-
MPN or Model
12387332-288
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.9 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.341 inches and 0.472 inches -
Fastener Length
Between 0.594 inches and 0.656 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.477 inches and 0.507 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
1910 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel -
Screw Material Specification
Qq-s-637 federal specification 1st material response or 66 federal standard all material responses -
Screw Surface Treatment
Zinc and chromate -
Screw Surface Treatment Specification
Astm b633, type ii assn standard single treatment response -
Color
Bronze or olive drab -
Thread Series Designator
Unc
More from these suppliers
- 5940-00-238-5598 MPN 8690304Quick Disconnect Terminal
- 5975-00-588-0387 MPN 7358624Electrical Conduit Bondnut
- 4820-00-656-3606 MPN 7049998Safety Relief Valve
- 5940-00-705-6732 MPN 7056732Lug Terminal
- 5975-01-054-9776 MPN 11646090Conduit Outlet Cover
- 5905-01-094-9571 MPN 12280251Wire Wound Fixed Resistor
- 5930-01-140-2539 MPN 12292903Push Switch
- 5935-01-141-9358 MPN 11602310Electrical Connector Cable Clamp
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-01-383-6025 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
12387332-288 | U S Army Tank Automotive Command |
12387332-288 | U S Army Tank Automotive Command |
12387332-288 | U S Army Tank Automotive Command |