NSN 5305-01-384-2015
High Torque Screw
Between 1.016 inches and 1.046 inches fastener length, fillister countersunk head style, between 0.4689 inches and 0.4739 inches head diameter, head height: between 0.012 inches and 0.016 inches .
Manufacturer part number 3M963-5L8 for national stock number 5305013842015.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-384-2015.
-
MPN or Model
3M963-5L8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
Between 1.016 inches and 1.046 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.4689 inches and 0.4739 inches -
Head Height
Between 0.012 inches and 0.016 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.3125 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 8740 -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-055-5511 MPN 32-11113-9Actuator Support Fitting
- 1560-00-103-1133 MPN 32-33050-19Longeron
- 5930-00-132-6519 MPN ST5M1341-002Switch Guard
- 1560-00-140-9512 MPN 32-33142-7Jet Blast Fairing Channel
- 1560-00-188-6587 MPN 53-881013-1Track Assembly
- 1560-00-219-4661 MPN 68A321040-1001Aircraft Access Door
- 1560-00-236-2260 MPN 32-33097-114Special Purpose Thermal Insulation
- 1560-00-262-4637 MPN 68A640018-2005Rudder Cartridge Arm
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-384-2015 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M963-5L8 | Boeing Company, The |
3M963-5L8 | Boeing Company, The |