NSN 5305-01-384-3470
Panel Screw
1.500 inches fastener length, spline drive shear head head style, between 0.306 inches and 0.313 inches head height, head minor diameter: between 0.457 inches and 0.469 inches .
Manufacturer part number A320C171-101 for national stock number 5305013843470.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-01-384-3470.
-
MPN or Model
A320C171-101
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.448 inches -
Fastener Length
1.500 inches -
Head Style
Spline drive shear head -
Head Height
Between 0.306 inches and 0.313 inches -
Head Minor Diameter
Between 0.457 inches and 0.469 inches -
Internal Drive Style
W/o internal drive -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Hardness Rating
80.0 rockwell b -
Minimum Yield Strength
80000 pounds per square inch -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel comp 303 or steel comp 304 or steel comp 316 -
Material Specification
66 federal standard all material responses -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-197-4319 MPN C521000071Tip Jack
- 5930-00-409-9672 MPN G122-437-006Rotary Switch
- 5935-00-473-3151 MPN B305001249Electrical Connector Backshell
- 5940-00-666-0732 MPN 142-49-69Stud Terminal
- 5905-00-778-5415 MPN C600007462Noninductive Wire Wound Fixed Resistor
- 5905-01-370-1122 MPN A600A361-101Film Fixed Resistor
- 5950-01-381-7488 MPN A504A682-101Reactor
- 5935-01-371-3129 MPN A520A661-101Electrical Receptacle Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-01-384-3470 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
A320C171-101 | Kearfott Corporation |
A320C171-101 | Kearfott Corporation |
A320C171-101 | Kearfott Corporation |
A320C171-101 | Kearfott Corporation |
A320C171-101 | Kearfott Corporation |
A320C171-101 | Kearfott Corporation |
A320C171-101 | Kearfott Corporation |
A320C171-101 | Kearfott Corporation |
A320C171-101 | Kearfott Corporation |