NSN 5305-01-384-7878
High Torque Screw
Between 1.360 inches and 1.390 inches fastener length, flat countersunk head style, 0.328 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number HR239-3-22P for national stock number 5305013847878.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-384-7878.
-
MPN or Model
HR239-3-22P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
Between 1.360 inches and 1.390 inches -
Head Style
Flat countersunk -
Head Diameter
0.328 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5737 assn standard single material response or ams5731 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-6212 MPN A1C617-14Externally Relieved Body Screw
- 5305-00-080-0207 MPN 3MA336CFA15Machine Screw
- 5305-00-478-0349 MPN AIC1181-5Close Tolerance Screw
- 5305-01-087-8797 MPN BACB30LL4-14Close Tolerance Screw
- 5305-01-304-0639 MPN LD111-0047-1019Close Tolerance Screw
- 5305-01-348-8659 MPN AIC4414-3-44Machine Screw
- 5305-01-433-8875 MPN TX1026V3-4AClose Tolerance Screw
- 5305-01-462-2675 MPN TX1026V3-11AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-384-7878 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR239-3-22P | Hi-shear Corporation |
HR239-3-22P | Lisi Aerospace Canada Corp |
AIC1651-3-22P | Sps Technologies, Llc |
SC3103-3-22P | Arconic Global Fasteners & Rings, |
SLB216-3-22P | Space-lok, Inc. |
E008-3-22P | Huck International, Inc. |
03A173-3-22P | Northrop Grumman Systems Corporation |
PBF1416-3-22P | Sps Technologies, Llc |
BF0015HC3A-3-22 | Lfc Industries Inc. |
123742-3-22P | Sps Technologies, Llc |
03A173-3-22P | Northrop Grumman Systems Corporation |
E008-3-22P | Huck Intl Inc |