NSN 5305-01-386-0479
High Torque Screw
1.283 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 03A173-3-15 for national stock number 5305013860479.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-386-0479.
-
MPN or Model
03A173-3-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.345 inches -
Fastener Length
1.283 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
0.938 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response or ams 5731 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-01-109-1350 MPN AIC985-10-36RClose Tolerance Screw
- 5305-01-160-7561 MPN HT4027-5-18Close Tolerance Screw
- 5305-01-374-8586 MPN AIC4463-06-8Machine Screw
- 5305-01-386-2933 MPN AIC1700-5-9Close Tolerance Screw
- 5305-01-417-2495 MPN TX1027D4-20Close Tolerance Screw
- 5305-01-457-8816 MPN AIC822-02-6Socket Head Cap Screw
- 5305-01-496-1429 MPN TX1027C3-4AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-386-0479 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A173-3-15 | Hi-shear Corporation |
03A173-3-15 | Lisi Aerospace Canada Corp |
E008-3-15 | Huck International, Inc. |
E008-3-15 | Huck Intl Inc |
SLB216-3-15 | Space-lok, Inc. |
03A173-3-15 | Northrop Grumman Systems Corporation |
AIC1651-3-15 | Sps Technologies, Llc |
SC3103-3-15 | Arconic Global Fasteners & Rings, |
BF0015HC-3-15 | Lfc Industries Inc. |
PBF1416-3-15 | Sps Technologies, Llc |
HR239-3-15 | Hi-shear Corporation |
123742-3-15 | Sps Technologies, Llc |