NSN 5305-01-387-7454
High Torque Screw
Between 0.949 inches and 0.979 inches fastener length, flat countersunk head style, between 0.246 inches and 0.280 inches head diameter, grip diameter: between 0.1365 inches and 0.1375 inches .
Manufacturer part number NAS7501-11 for national stock number 5305013877454.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-387-7454.
-
MPN or Model
NAS7501-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.949 inches and 0.979 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.246 inches and 0.280 inches -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
Cross recess type 1 -
End Application
Global hawk, rq-4a -
Thread Diameter
0.138 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-6173 MPN NAS1100E00-6Machine Screw
- 5305-00-012-8226 MPN MS51851-136Tapping Screw
- 5305-00-052-9045 MPN MS24630-26Tapping Screw
- 5305-00-128-1996 MPN NAS222-27Machine Screw
- 5305-00-205-3463 MPN NAS1351-4H10Socket Head Cap Screw
- 5305-00-225-9092 MPN MS90726-37Hexagon Head Cap Screw
- 5305-00-225-9450 MPN MS16995-70Socket Head Cap Screw
- 5305-00-253-5630 MPN MS21318-54Drive Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-387-7454 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7501-11 | National Aerospace Standards |