NSN 5305-01-388-9086
High Torque Screw
Between 0.300 inches and 0.320 inches fastener length, roof head style, between 0.614 inches and 0.639 inches head diameter, head height: between 0.080 inches and 0.085 inches .
Manufacturer part number 1451M12P06 for national stock number 5305013889086.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-388-9086.
-
MPN or Model
1451M12P06
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
139820 - Nickel Bolts/nails/nuts/rivets Etc -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.273 inches -
Fastener Length
Between 0.300 inches and 0.320 inches -
Head Style
Roof -
Head Diameter
Between 0.614 inches and 0.639 inches -
Head Height
Between 0.080 inches and 0.085 inches -
Spline Major Diameter
0.155 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Torx -
Thread Diameter
0.190 inches -
Grip Length
Between 0.027 inches and 0.047 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Nickel alloy 718 -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-126-0742 MPN R984P7701AInductive Wire Wound Fixed Resistor
- 5905-00-126-5914 MPN R984P0310AInductive Wire Wound Fixed Resistor
- 1560-00-221-7181 MPN 9641M75G08Thrust Blocker Link
- 4920-00-420-8122 MPN 1C3874G4Interface Device Adapter Assembly
- 5905-00-957-4739 MPN R984P0900AInductive Wire Wound Fixed Resistor
- 4920-00-970-4926 MPN 1C2824G4Test Stand-airvalve
- 4820-01-024-6006 MPN 576C366P7Valve Seal
- 4920-01-115-1440 MPN 1C6354G07Aircraft Engine Maintenance Fixture
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-388-9086 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1451M12P06 | General Electric Company |