NSN 5305-01-389-7996
High Torque Screw
Between 0.511 inches and 0.541 inches fastener length, flat countersunk head style, between 0.269 inches and 0.279 inches head diameter, locking feature: strip threads or patch threads or pellet threads.
Manufacturer part number NAS1161E3 for national stock number 5305013897996.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-389-7996.
-
MPN or Model
NAS1161E3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.363 inches and 0.413 inches -
Fastener Length
Between 0.511 inches and 0.541 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.269 inches and 0.279 inches -
Locking Feature
Strip threads or patch threads or pellet threads -
Grip Diameter
Between 0.1365 inches and 0.1375 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.138 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 302 fastener -
Material Specification
Ams5737 assn standard single material response fastener -
Surface Treatment
Passivate fastener -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response fastener -
Thread Series Designator
Unjc -
Specification Data
80205-nas1161 professional/industrial association standard
More from these suppliers
- 5305-00-008-9058 MPN NAS1102E04-3PMachine Screw
- 5305-00-043-2678 MPN MS24694S92Machine Screw
- 5305-00-057-9972 MPN NAS1351C00-6Socket Head Cap Screw
- 5305-00-059-4568 MPN MS35190-253Machine Screw
- 5305-00-080-9238 MPN NAS584-11Machine Screw
- 5305-00-083-1816 MPN NAS1132V2Close Tolerance Screw
- 5305-00-093-6685 MPN MS21125B415Close Tolerance Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-389-7996 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1161E3 | National Aerospace Standards |