NSN 5305-01-389-9412
High Torque Screw
Between 0.810 inches and 0.830 inches fastener length, crowned hexagon head style, between 0.096 inches and 0.110 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number MS3369-307 for national stock number 5305013899412.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-389-9412.
-
MPN or Model
MS3369-307
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.236 inches and 0.286 inches -
Fastener Length
Between 0.810 inches and 0.830 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.096 inches and 0.110 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Grip Length
Between 0.448 inches and 0.464 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel comp 630 -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-103-7476 MPN MS27497REB18-32PElectrical Receptacle Connector
- 5935-00-115-2304 MPN MS17346R32N17PElectrical Receptacle Connector
- 5940-00-115-5023 MPN MS20659-124Lug Terminal
- 5935-00-140-3215 MPN MS27473T18A32SElectrical Plug Connector
- 5935-00-149-4096 MPN MS3102A18-10SElectrical Receptacle Connector
- 5935-00-186-9922 MPN MS27484E16B26SElectrical Plug Connector
- 5935-00-204-7604 MPN MS27484T836PElectrical Plug Connector
- 5935-00-244-8765 MPN MS27484T14B37SElectrical Plug Connector
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-389-9412 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS3369-307 | Military Standards |