NSN 5305-01-390-1546
High Torque Screw
Between 0.660 inches and 0.690 inches fastener length, flat countersunk undercut head style, 0.3047 inches head diameter, head height: 0.049 inches .
Manufacturer part number NAS1581F3T5X for national stock number 5305013901546.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-390-1546.
-
MPN or Model
NAS1581F3T5X
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.314 inches -
Fastener Length
Between 0.660 inches and 0.690 inches -
Head Style
Flat countersunk undercut -
Head Diameter
0.3047 inches -
Head Height
0.049 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 5305-00-007-1565 MPN NAS1100C06-8PMachine Screw
- 5305-00-052-9971 MPN MS24619-25Tapping Screw
- 5305-00-054-6869 MPN MS51031-48Setscrew
- 5305-00-057-6950 MPN MS21262-52Socket Head Cap Screw
- 5305-00-058-9369 MPN MS51977-31Setscrew
- 5305-00-068-0543 MPN NAS1351-3H-10PSocket Head Cap Screw
- 5305-00-244-2880 MPN NAS623-4-13Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-390-1546 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581F3T5X | National Aerospace Standards |