NSN 5305-01-390-1872
High Torque Screw
Between 0.814 inches and 0.844 inches fastener length, flat countersunk head style, 0.704 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS1156E7P for national stock number 5305013901872.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-390-1872.
-
MPN or Model
NAS1156E7P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.391 inches -
Fastener Length
Between 0.814 inches and 0.844 inches -
Head Style
Flat countersunk -
Head Diameter
0.704 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1156 professional/industrial association standard
More from these suppliers
- 5935-01-323-4641 MPN MS33687-24-28PElectrical Connector Insert
- 5940-01-391-1827 MPN NAS1063A4-TB138HTerminal Board Marker Strip
- 5940-01-413-3019 MPN NAS1063B75-91Terminal Board Marker Strip
- 4920-01-571-0093 MPN NAS1213R20K3 Strap Assembly-tie
- 5940-01-451-4414 MPN NAS1063A20-500BBTerminal Board Marker Strip
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5305-00-008-9117 MPN NAS1190E04T4LSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-390-1872 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1156E7P | National Aerospace Standards |