NSN 5305-01-390-1873
High Torque Screw
Between 1.573 inches and 1.703 inches fastener length, flat countersunk head style, 0.2516 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1993C20T for national stock number 5305013901873.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-390-1873.
-
MPN or Model
NAS1993C20T
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
Between 1.573 inches and 1.703 inches -
Head Style
Flat countersunk -
Head Diameter
0.2516 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1993 professional/industrial association standard
More from these suppliers
- 5305-00-008-9118 MPN NAS1190E04T8LSocket Head Cap Screw
- 5305-00-052-6890 MPN MS35198-52Machine Screw
- 5305-00-053-0614 MPN NAS1100C04-22Machine Screw
- 5305-00-053-1136 MPN MS35273-95Machine Screw
- 5305-00-057-0496 MPN MS24694S12Machine Screw
- 5305-00-057-0526 MPN NASM51958Machine Screw
- 5305-00-061-5113 MPN NAS1703-4RShoulder Screw
- 5305-00-071-2536 MPN MS24694S190Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-390-1873 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1993C20T | National Aerospace Standards |