NSN 5305-01-390-9042
High Torque Screw
Between 0.426 inches and 0.456 inches fastener length, pan head style, between 0.306 inches and 0.322 inches head diameter, head height: 0.289 inches .
Manufacturer part number NAS1134E2 for national stock number 5305013909042.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-390-9042.
-
MPN or Model
NAS1134E2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 0.426 inches and 0.456 inches -
Head Style
Pan -
Head Diameter
Between 0.306 inches and 0.322 inches -
Head Height
0.289 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1134 professional/industrial association standard
More from these suppliers
- 5935-01-406-9472 MPN NAS1653-12B10SNElectrical Plug Connector
- 5940-01-451-3293 MPN NAS1063E1-100HTerminal Board Marker Strip
- 5305-00-023-0053 MPN NAS560HK3-26Machine Screw
- 5305-00-058-4016 MPN MS24694S128Machine Screw
- 5305-00-058-4039 MPN NAS1133-3Close Tolerance Screw
- 5305-00-059-8255 MPN MS35214-30Machine Screw
- 5305-00-189-9384 MPN NAS1635-04LL6Socket Head Cap Screw
- 5305-00-247-0404 MPN MS35308-383Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-390-9042 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1134E2 | National Aerospace Standards |