NSN 5305-01-391-3580
High Torque Screw
Offset cruciform recess per ms33781.
Manufacturer part number NAS1581K3T36 for national stock number 5305013913580.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-391-3580.
-
MPN or Model
NAS1581K3T36
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 2.598 inches and 2.628 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 2.240 inches and 2.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches fastener -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard 1st material response or ams 4967 assn standard 2nd material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1581 professional/industrial association standard
More from these suppliers
- 5935-00-502-4359 MPN NAS1666-12Electrical Connector Cable Clamp
- 5935-00-763-6983 MPN NAS1196-13XReceptacle Dummy Connector
- 5305-00-016-7125 MPN MS3212-6Machine Screw
- 5305-00-057-0537 MPN MS51958-53Machine Screw
- 5305-00-059-3657 MPN NAS1635-3-6Machine Screw
- 5305-00-225-9102 MPN MS90726-47Hexagon Head Cap Screw
- 5305-00-226-1064 MPN NAS662-3R20Machine Screw
- 5305-00-337-9512 MPN NAS1189-08P12LSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-391-3580 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1581K3T36 | National Aerospace Standards |