NSN 5305-01-391-6126
High Torque Screw
Dry film lubricant--threads only.
Manufacturer part number 03A416-4-13L for national stock number 5305013916126.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-391-6126.
-
MPN or Model
03A416-4-13L
-
Schedule B
8105.90.0000 (Cobalt, wrought, and articles thereof) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 1.201 inches and 1.231 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.503 inches and 0.511 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.803 inches and 0.823 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 129.0 degrees and 131.0 degrees -
Material
Cobalt comp mp-35-n -
Material Specification
Ams 5844 federal specification single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-01-350-9131 MPN DAA7278G310-001Aircraft Maintenance Fixture
- 5985-01-372-1002 MPN DAA3394P420-113Waveguide Assembly
- 1680-01-391-1751 MPN DAA3121A278-029Remote Control Lever
- 5985-01-434-7999 MPN DAA3341P002-305Antenna Coupler Group
- 1560-01-398-1076 MPN DAA3420D129-212Aircraft Thermal Insulation
- 5935-01-422-4844 MPN 05A092S52120CElectrical Connector Backshell
- 5305-01-391-5469 MPN 03A292-08-10Machine Screw
- 5305-01-392-0736 MPN DAA7229D156-001Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-01-391-6126 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A416-4-13L | Northrop Grumman Systems Corporation |
03A416-4-13L | Sps Technologies, Llc |
PBF1571-4-13L | Sps Technologies, Llc |
125301-4-13L | Sps Technologies, Llc |
HR258-4-13L | Hi-shear Corporation |
HR258-4-13L | Lisi Aerospace Canada Corp |
03A416-4-13L | Northrop Grumman Systems Corporation |
PBF1571-4-13L | Sps Technologies, Llc |
125301-4-13L | Sps Technologies, Llc |
HR258-4-13L | Hi-shear Corporation |
HR258-4-13L | Lisi Aerospace Canada Corp |
03A416-4-13L | Sps Technologies, Llc |
03A416-4-13L | Northrop Grumman Systems Corporation |
PBF1571-4-13L | Sps Technologies, Llc |
HR258-4-13L | Hi-shear Corporation |
125301-4-13L | Sps Technologies, Llc |
HR258-4-13L | Lisi Aerospace Canada Corp |
03A416-4-13L | Sps Technologies, Llc |
Stock Check
![](/public/images/partscage_shelf3.png)