NSN 5305-01-391-9689
Tap Bolt
2.500 inches fastener length, 0.233 inches head height, 0.640 inches width between flats, shank unthreaded hole diameter: 0.121 inches first hole and 0.125 inches first hole.
Manufacturer part number MS51110-66 for national stock number 5305013919689.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-01-391-9689.
-
MPN or Model
MS51110-66
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
2.500 inches -
Fastener Length
2.500 inches -
Head Height
0.233 inches -
Width Between Flats
0.640 inches -
Shank Unthreaded Hole Diameter
0.121 inches first hole and 0.125 inches first hole -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
70000 pounds per square inch -
Hardness Rating
235.0 brinell standard -
Minimum Yield Strength
40000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.344 inches first hole -
Material
Steel comp 410 or steel comp 416 or steel comp 430 -
Material Specification
Fed standard 66 federal standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-01-327-6731 MPN 05A091N1E08CElectrical Connector Backshell
- 1680-01-376-7367 MPN DAA3255D002-011Aircraft Door Hook
- 1560-01-388-9767 MPN DAA7228D055-001Aircraft Access Door
- 5975-01-398-1460 MPN 1310-0101-33Rigid Metal Conduit
- 4920-01-423-6023 MPN DAA7221A177-001Pneumatic System Components Test Set
- 5975-01-398-1456 MPN 1310-0101-32Rigid Metal Conduit
- 1560-01-371-2585 MPN DAA3144A083-031Aircraft Access Cover
- 1680-01-383-7437 MPN DAA3233A017-013Electrical-electronic Equipment Control Panel
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-01-391-9689 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS51110-66 | Military Standards |
DAA7278D209-001 | Northrop Grumman Systems Corporation |
MS51110-66 | Military Standards |
DAA7278D209-001 | Northrop Grumman Systems Corporation |