NSN 5305-01-392-2595
High Torque Screw
Between 0.921 inches and 0.951 inches fastener length, flat countersunk head style, between 0.447 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number PBF1570-4-7 for national stock number 5305013922595.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-392-2595.
-
MPN or Model
PBF1570-4-7
-
Schedule B
8105.90.0000 (Cobalt, wrought, and articles thereof) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.498 inches -
Fastener Length
Between 0.921 inches and 0.951 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.447 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
240000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Cobalt comp mp-35-n -
Material Specification
Amss 5844 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-725-5918 MPN PBF1068-530CMachine Screw
- 5305-00-766-5306 MPN 51B581-4-11HClose Tolerance Screw
- 5305-00-840-3538 MPN 51B334-4Close Tolerance Screw
- 5305-01-108-2524 MPN 3M938-6D8-7Close Tolerance Screw
- 5305-01-123-8461 MPN PBF1069-315CSocket Head Cap Screw
- 5305-01-140-7286 MPN BACB30LH4-7Close Tolerance Screw
- 5305-01-178-2078 MPN LD111-0044-0825Close Tolerance Screw
- 5305-01-190-2191 MPN PBF1355A06-5Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-392-2595 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1570-4-7 | Sps Technologies, Llc |
03A415-4-7 | Northrop Grumman Systems Corporation |
HR257-4-7 | Hi-shear Corporation |
125300-4-7 | Sps Technologies, Llc |