NSN 5305-01-393-5604
High Torque Screw
Finish cadmium fluoborate plate.
Manufacturer part number AIC618-3-11 for national stock number 5305013935604.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-393-5604.
-
MPN or Model
AIC618-3-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 1.006 inches and 1.066 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.228 inches and 0.288 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Single Shear Strength
132000 pounds per square inch -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.643 inches and 0.703 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
100 degree reduced flush head, offset cruciform recess, 132 ksi shear -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 national specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-097-8941 MPN BACB30LU4-2Close Tolerance Screw
- 5305-01-164-2330 MPN BACB30LU3P6Close Tolerance Screw
- 5305-01-217-2922 MPN BACB30LU4-20XShoulder Screw
- 5305-01-365-0404 MPN BACB30LK3-13Close Tolerance Screw
- 5305-01-435-6306 MPN BACB30LU9-19Close Tolerance Screw
- 5305-01-435-7934 MPN BACB30LU9-36Close Tolerance Screw
- 5305-01-504-0534 MPN BACB30LH3U3Close Tolerance Screw
- 5306-00-905-8448 MPN VFK100G-04004Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-393-5604 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC618-3-11 | Sps Technologies, Llc |
93926-3-11 | Sps Technologies, Llc |
93926-3-11 | Sps Technologies, Llc |
C20645-3-11 | Lockheed Martin Corporation |
C20645-3-11 | Saturn Fasteners Inc |
GS1009-3-11 | B & B Specialties Inc. |
VT10021-3-11 | Valley-todeco, Inc. |