NSN 5305-01-396-3931
High Torque Screw
Between 1.173 inches and 1.203 inches fastener length, flat countersunk head style, between 0.429 inches and 0.477 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS8705-12 for national stock number 5305013963931.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-396-3931.
-
MPN or Model
NAS8705-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.438 inches -
Fastener Length
Between 1.173 inches and 1.203 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.429 inches and 0.477 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.312 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Color
Green threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas8705 professional/industrial association standard
More from these suppliers
- 5940-01-413-3010 MPN NAS1063B249-258Terminal Board Marker Strip
- 5940-01-425-7396 MPN NAS1063A11-337Terminal Board Marker Strip
- 1680-01-479-7276 MPN NAS354-5-1488Rod
- 5305-00-052-6890 MPN MS35198-52Machine Screw
- 5305-00-052-6921 MPN MS24629-57Tapping Screw
- 5305-00-059-8263 MPN MS35214-38Machine Screw
- 5305-00-061-0042 MPN NAS1635-06-24PMachine Screw
- 5305-00-145-0707 MPN NAS1096-1-5Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-396-3931 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS8705-12 | National Aerospace Standards |
Stock Check
- NE: 673
- NS: 1